RAPROZA - RADAR FOR OBJECTS AND PREMISES SECURITY
New Radars | RAPROZA - RADAR FOR OBJECTS AND PREMISES SECURITY
One of effective, however currently very little exploited technologies, consists in premises and their external place protection with the help of small and inexpensive radars that could be remote controlled and their information can be transferred to remote check points guarding both military areas and civil premises and objects.
Technical description
The radar is characterized by the most modular and flexible structure and concept. It can be utilized both in stationary, and mobile applications. Very important property of this radar consists in the application of a very low radiated pulse power up to 2 W. Such small output pulse power is used on account of embarrassing, or possibly full excluding of the radar detection and localization with the help of personal detectors or passive tracking systems, because applied radiated power is practically hidden in ambient electromagnetic smog. As opposed to the majority of currently applied equipment of this type, offered radar contains both analog output, and digital output of detected information. Its structure involves fully solid-state transmitter and sophisticated receiver utilizing applications with long pulse compression. Transmitter and receiver utilize automatic digital calibration and diagnostics. Radar signal processor is designed for the analysis of information detected by the radar. Video signals filtered according to Doppler speeds are lead to it from the signal processor. Their filtering and properties analysis are performed here. After the filtering of noise, interference filtering and uninteresting ground targets removal, remaining information enables compilation of the picture of bodies that are mathematically described and transmitted to higher processing systems via a modem line. Output from the extractor is available both in analog form for local application, and also in digital form. Data from the digital output can be integrated in automated command and control systems. Analog output is intended only for displaying information within the framework of a local system where the radar dislocated. Číslicový Digital output provides a picture of the situation. After its delivery to superior control and protection systems through standard communication means (LAN/WAN data network, serial/modem line) and evaluation in a superstructure system, it enables acquisition of more complex information on guarded area within the framework of electronic intelligence. Consequently, set of information increases, which contributes to the more definite determination of properties of particular ground and airborne objects in framework of the security realization. It shall significantly enhance security, and especially accelerate decision processes at critical situations resolution.
Basic Specifications
| Transmitter: | |
|---|---|
| Frequency band | 9 ÷ 10 GHz |
| Power | basic - 2 W |
| decreased - 2 ÷ 1000 mW | |
| Antenna dimensions: | |
| Horizontal | 750 mm |
| Vertical | 600 mm |
| Antenna movement: | |
| Azimuth: | |
| rotary | basic – 3 rpm |
| accelerated – 6 rpm | |
| decelerated – 1 rpm | |
| sector | basic – 20 °/s |
| decelerated – 5 °/sec | |
| Elevation: | adjustable tilt -10° ÷ + 15° |
| Ranges, accuracies, and resolution: | |
| Range (1 m2): | 16 km |
| Remote accuracy (RMS): | 3 m |
| Remote resolution (RMS): | 15 m |
| Angle accuracy (RMS): | 0,5° |
| Angle resolution (RMS): | 4,5° |
| Power supply: | |
| System DC distribution | 18 ÷ 36 VDC |


